Hho Dry Cell - How Big ?

How Big Does a HHO Dry Cell Need To Be

I and many other hho dry cell builders have spent hours and hours of research on plate size, hole sizes and configurations
electrolyte mixes and number of amps needed to be most efficient with our Hydrogen generators.
We have narrowed it down to the 3.5 x 3.5 plates that we use to build our hho drycells.
At peak efficiency you can expect 1LPM from around 7.5 amps at 13.2 volts.

There are many people out there that would like you to believe that you need a lot of hho gas added to your engine to see good gains, this is not the case.
With 1- 11 plate cell added to a six cylinder motor run on gas you should get an increase of 30-40% MPG on the HWY and 10-15% in the CITY
when everything is in line and running correctly.
Our hho dry cell kit puts out about 1.5 LPM at around 12-16 amps . That is all the hho gas you need to see to see good mpg gains, any more is just wasted.

Complete hho dry cell kits at hho2u.com

Will Cash For Clunkers Stop HHO Kits or Hydrogen on Demand

HHO Dry Cell Kit or Trade In ?

It seams the "cash for clunkers" program is off to a good start already.
But is it really helpful to those who are already suffering with lower income streams in this jacked up economy ?
Most people who are fortunate enough to have a job are having to drive farther to get to work which means more fuel to buy, so trading in your "clunker" for a vehicle that gets better mileage seems to be a great idea on the surface.
Personally I think it is just another scam to sell newer cars which will rope you into unneeded payments.
A good Hydrogen on demand system installed on a vehicle that is getting 18 miles to the gallon of gas can boost your MPG past 25 for about $250.
If you need honest help and truthful information about hydrogen on demand go to hho2u
For complete hho dry cell kits that have proven to save lots of people money on fuel go to Complete HHo Dry Cell Kits at hho2u.com

HHO Kits Do Work

Hydrogen on demand for your auto or truck is a remarkable simple technology. There are those that would like to complicate hho injection, but it really is not that difficult
to grasp

If you add HHO to your engine, you will get an increase in combustion efficiency. That is just simple science, and hho gas works as certainly as turning on a light switch. But to get your gains with newer vehicles, you have to compensate for the additional oxygen that will now be detected in the exhaust.
And that is done by modifying the sensor information going to the computer. If you add hho gas and modify your sensors you will get a dramatic increase in fuel mileage and a corresponding decrease in fuel emissions.

Wit our HHO dry cell kits we expect people to get a minimum of 25% increase in MPG, and 30-35% is our expected average.
Some people have reported 50% or more mileage increases.
By proper application of this simple Hydrogen on demand technology, you can get these increases for your vehicle too.

Don't Over Heat Your Hho Dry Cell

Increasing Efficiency Of Your HHO Dry Cell

By adding an acid base, or salt to the hho cell's water supply you will drop the electrical resistance of the water.
With a catalyst in the water,it takes fewer amps of electricity to produce the desired amount of HHO gas, since the ions in the water are able
to move more freely.
Potassium hydroxide (KOH) is a popular catalyst for HHO-producing cells.
It is important to make sure the catalyst you're using isn't highly concentrated, for two reasons.
1) Too much catalyst will draw too many amps and cause over heating.
2) Too much catalyst causes some of the mix to boil into your hho gas mix and could damage your inter cooler.

Keep in mind, a properly designed HHO Dry Cell will not need large doses of electrolyte.
Varying amounts are added to the mixture in order to tune the on board-hydrogen on demand system. We recommend a 20 to 1 mix max.
Heat, and electromagnetic fields are also employed to help break down the water, although this technology is usually used by advanced hho experimenters.

Learn all about HHO Dry Cell

Hydrogen on Demand - Do You Know What It Can Do For You

HHO Dry Cell And Hydrogen on Demand

Just to let all those that are interested in advancing your knowledge base on hho generators
and hydrogen on demand systems We have decided to spend more time helping those that want further information on hho dry cells and other
hho parts and systems, and less time trying to help those naysayers understand how it does indeed work
most of these guys sound like a broken records.

You Alternator is constantly spinning so the brushes are generating a small field. The A/C that is produced
is a constant in the system regardless.
There is never a time that the alternator is not in use wither being your spark-plugs, fans, radio, lights, pumps...etc
energy is being used so the alternator is compensating.
Like I have said before the A/C is constantly being generated into an isolating D/C current from the magnetic field.
If your regulator turns it off for quite possible a second or two the field is still activated because of motion
and the copper brushing. Try not to fool yourself that you know how it works. Anyway back to the subject of HHO.
It does work...I have seen it work on many gas and diesel cars and trucks and it works on my cars.

If you are serious about Hydrogen on demand visit our hho website. If you still are one of those that claim
Hydrogen on Demand doesn't work you can find lots of proof that it does at hho2u.com and all over the Internet