Showing posts with label HHO GAS. Show all posts
Showing posts with label HHO GAS. Show all posts

Friday, October 8, 2010

HHO in Europe - hho dry cells Saving Gas in Europe


Hi all hho Generator Installers
European countries are finally catching on to the awesome results that can be obtained by adding hho gas to their fuel. HHO2u has been getting feedback from all over Europe.
People in Greece, Netherlands and even Australia are getting results, both in fuel savings and huge reductions in harmful emissions.
With gas prices 3 times what they are in the US, these European hho experimenters are extremely Happy.

Check out these hho Europe Results

Sunday, August 15, 2010

HHO Generators and Your Money


Hey folks I haven't Posted in a while, been busy experimenting with an hho generator design that will save big rig drivers huge money EVERY install.
Please everyone open your eyes to what the "oil barons" are pulling right now (9/15/10). The price of gasoline has gone up 12 cents a gallon in 3 weeks, NO Reason for this. More people need to implement the simple technology of Hydrogen on demand on their cars and trucks.
I dont know what more we can do, we have set up the best hho dry cells and hho dry cell kits at the lowest possible prices.
Why do people wait until the gas prices take them to their knees to install a device that works on a percentage bases. No matter what you pay for fuel, if you can save 10 or 20% it is still money in your pocket.
European hho interest has become more popular lately for good reason .. $7.50 a gallon dont waite for that here in USA before you install Hydrogen on Demand on your car.

Best HHO Generators

Sunday, December 20, 2009

Proper Koh for HHO Dry Cell - Max HHO Gas


We have always told people when starting up their HHO Dry Cells or other HHO generators to start with apx. 2-3 tbsp. of KOH
per 2 Quart container and add as needed to bring up amps.
This is a weak solution for start up only.

At HHO2u.com we get asked a lot How do I "get the right mix" ??


So Here It Is:

10% to 20% KOH concentration (by weight) is so far reported and understood to be the optimum.
We run about a 20% solution in our 11 plate HHO dry cells at 15 amps warm and get 1- 1.5 LPM of HHO gas.

Water having a density of 1 gm/ml (gm and ml are equal)

KOH weighs 11 grams per heaping teaspoon. = ( 33 gms per Tbsp)

1 quart (qt) water = 946.35 grams

To make 1 Kg of a 20% KOH solution by weight, add 200 grams of KOH to 800 gm of water. To make 1 Kg of a 10% KOH solution by weight, add 100 grams of KOH to 900 gm of water.

The total weight is always 1,000 grams containing whatever percentage of KOH that is wanted.

So without turning this into a science. -- 10% mix is APX. 3 tbsp. of KOH to 1 Quart of water.

I hope this helps answer the question of how much KOH to mix for your HHO Dry Cell.
Remember each HHO generator, wither a drycell design or wet cell operates differently, so start with a weak solution and build up.

Thanks for stopping by.

Explore more about hho generator & hho gas | HHO and EFIE | hho dry cell design

Tuesday, October 13, 2009

HHO Dry Cell - HHO Dry Cell Kits - About HHO Websites ?


Do these guys really know anything about HHO, HHO Dry Cells and Hydrogen on Demand systems, or are they just faking it ?


It is really a shame when greed and envy drive a person to lye and steal. You can find this all over the Internet.
You don't have to be the best at something or even know anything about a subject as long as you can weasel your way to the top of the search pages you can fake it.


This goes for anything including Hydrogen on Demand and related HHO parts, such as the very popular HHO Dry cell.


It seems there are other hho dry cell sites out there that would like you to believe that they are the most honest and forthright hydrogen on demand experts on the Internet.
Well up until I saw this FAKE post using my hho website name, I would have let this guy stew in his own lies.

But now I find the need to let you people that are searching for HHO Dry Cells and HHO information, know a little about this Fake "hho dry cell Guy".


Here is Post That this "hho dry cell salesman" put on his site that is obviously written by him and is not a real comment from anyone. I know this because I would have been the one talking to this person and the conversation did not take place.


"Thought you would like to know that I spoke with another hho site owner at hho2u.com
and he is really running you down man. It was very clear to me that he was trying to cover
his butt for telling buyers he was the producer of the cell he sells on his site.
I thought you would like an article I found where this guy is now ...
The link is http://www.goarticles.com/cgi-bin/showa.cgi?C=1975321


It really is a shame that this hho dry cell salesman finds the need to try to build credibility as an hho expert by writing comments to his self. But when he uses my name in the process the gloves come off.

Saturday, September 5, 2009

New Dual Cell HHO Dry Cell Kit & Antelope Valley Auto

Hey all you Hydrogen on Demand nuts, how ya'll doin.
Thought i would write a Quickie to let ya know we put together an awesome Dual 11 - plate dry cell kit for ya. This hho dry cell kit puts out the hho gas big time.
Take a look at this cool Dual hho dry cell kit at HHO2U.com.

Ps : We just launched an Automotive site about Antelope Valley Autos, mostly targeted at finding the best deals for new and used cars for people living in the Antelope valley Ca. Check it out
Antelope Valley Auto .com

Saturday, August 22, 2009

Hho Dry Cell - How Big ?

How Big Does a HHO Dry Cell Need To Be

I and many other hho dry cell builders have spent hours and hours of research on plate size, hole sizes and configurations
electrolyte mixes and number of amps needed to be most efficient with our Hydrogen generators.
We have narrowed it down to the 3.5 x 3.5 plates that we use to build our hho drycells.
At peak efficiency you can expect 1LPM from around 7.5 amps at 13.2 volts.

There are many people out there that would like you to believe that you need a lot of hho gas added to your engine to see good gains, this is not the case.
With 1- 11 plate cell added to a six cylinder motor run on gas you should get an increase of 30-40% MPG on the HWY and 10-15% in the CITY
when everything is in line and running correctly.
Our hho dry cell kit puts out about 1.5 LPM at around 12-16 amps . That is all the hho gas you need to see to see good mpg gains, any more is just wasted.

Complete hho dry cell kits at hho2u.com

Monday, August 17, 2009

Will Cash For Clunkers Stop HHO Kits or Hydrogen on Demand

HHO Dry Cell Kit or Trade In ?

It seams the "cash for clunkers" program is off to a good start already.
But is it really helpful to those who are already suffering with lower income streams in this jacked up economy ?
Most people who are fortunate enough to have a job are having to drive farther to get to work which means more fuel to buy, so trading in your "clunker" for a vehicle that gets better mileage seems to be a great idea on the surface.
Personally I think it is just another scam to sell newer cars which will rope you into unneeded payments.
A good Hydrogen on demand system installed on a vehicle that is getting 18 miles to the gallon of gas can boost your MPG past 25 for about $250.
If you need honest help and truthful information about hydrogen on demand go to hho2u
For complete hho dry cell kits that have proven to save lots of people money on fuel go to Complete HHo Dry Cell Kits at hho2u.com

Saturday, August 15, 2009

HHO Kits Do Work

Hydrogen on demand for your auto or truck is a remarkable simple technology. There are those that would like to complicate hho injection, but it really is not that difficult
to grasp

If you add HHO to your engine, you will get an increase in combustion efficiency. That is just simple science, and hho gas works as certainly as turning on a light switch. But to get your gains with newer vehicles, you have to compensate for the additional oxygen that will now be detected in the exhaust.
And that is done by modifying the sensor information going to the computer. If you add hho gas and modify your sensors you will get a dramatic increase in fuel mileage and a corresponding decrease in fuel emissions.

Wit our HHO dry cell kits we expect people to get a minimum of 25% increase in MPG, and 30-35% is our expected average.
Some people have reported 50% or more mileage increases.
By proper application of this simple Hydrogen on demand technology, you can get these increases for your vehicle too.

Monday, August 10, 2009

Don't Over Heat Your Hho Dry Cell


Increasing Efficiency Of Your HHO Dry Cell


By adding an acid base, or salt to the hho cell's water supply you will drop the electrical resistance of the water.
With a catalyst in the water,it takes fewer amps of electricity to produce the desired amount of HHO gas, since the ions in the water are able
to move more freely.
Potassium hydroxide (KOH) is a popular catalyst for HHO-producing cells.
It is important to make sure the catalyst you're using isn't highly concentrated, for two reasons.
1) Too much catalyst will draw too many amps and cause over heating.
2) Too much catalyst causes some of the mix to boil into your hho gas mix and could damage your inter cooler.

Keep in mind, a properly designed HHO Dry Cell will not need large doses of electrolyte.
Varying amounts are added to the mixture in order to tune the on board-hydrogen on demand system. We recommend a 20 to 1 mix max.
Heat, and electromagnetic fields are also employed to help break down the water, although this technology is usually used by advanced hho experimenters.

Learn all about HHO Dry Cell

Sunday, August 9, 2009

Hydrogen on Demand - Do You Know What It Can Do For You

HHO Dry Cell And Hydrogen on Demand

Just to let all those that are interested in advancing your knowledge base on hho generators
and hydrogen on demand systems We have decided to spend more time helping those that want further information on hho dry cells and other
hho parts and systems, and less time trying to help those naysayers understand how it does indeed work
most of these guys sound like a broken records.

You Alternator is constantly spinning so the brushes are generating a small field. The A/C that is produced
is a constant in the system regardless.
There is never a time that the alternator is not in use wither being your spark-plugs, fans, radio, lights, pumps...etc
energy is being used so the alternator is compensating.
Like I have said before the A/C is constantly being generated into an isolating D/C current from the magnetic field.
If your regulator turns it off for quite possible a second or two the field is still activated because of motion
and the copper brushing. Try not to fool yourself that you know how it works. Anyway back to the subject of HHO.
It does work...I have seen it work on many gas and diesel cars and trucks and it works on my cars.

If you are serious about Hydrogen on demand visit our hho website. If you still are one of those that claim
Hydrogen on Demand doesn't work you can find lots of proof that it does at hho2u.com and all over the Internet

Thursday, July 2, 2009

We Will Be Using Hydrogen Fuel Cells Soon

Thank You To All Hydrogen on Demand Experimenters

Remember that all the great inventions in this world started, not in magnificent buildings but in small basements, garages and small work shops, by people like you and me and thanks to them we are able to enjoy the life style we are so used to and take for granted.

Who knows, maybe you will be the person that will take our generation and our planet into the next frontier: The Hydrogen Energy revolution.

We want to thank every one of you and wish the best of luck on your Hydrogen on Demand projects, please keep us informed about your HHO generator projects, if you send us pictures and testimonials, we will try to publish them on our Hydrogen on Demand site - HHO2U.com, so we all can learn from your experiences.
Thank You Contact Us Any Time HHO 2u Contact

Thursday, June 18, 2009

HYDROGEN ON DEMAND AND Gov. Grants

Folks: here is the link for the Dept of Energy (DOE) ARPA-E funding application.

http://arpa- e.energy. gov/keydocs/ ARPA-E-FOA. PDF

Happy grant-writing to you all - we can do this!
Unfortunately we will have to get on the next boat now that we know the way the gov is operating on these issues.
Anyone with a working and productive Hydrogen on Demand system should not only continue with their research but take a look at this PDF and get prepared for the next round of grants.
Below are comments from some "big boys" in the HHO generator building industry that wanted to apply for this grant.

That 4-6 week registration process sounds like Catch-22 BS. They didn't even publish the Funding Opportunity Announcement until April 27th, about 5 weeks short of the due date for Concept Papers.
Nice to have this information, though.
We might just have to transform the world without the help of the Dept of Energy. Their loss...
==============
On page 14 is says you must submit a cover sheet a week before the concept deadline that is showing June 2, 2009 on the top page of the grant. Why they hide a secret deadline I dont know.

I emailed the Contracting Officer and he said I was too late because I hadn't gotten a D&B number and website by the May 28 deadline but that I could submit an unsolicited application or wait until the next offer. I think several of us should email him and say, "We are individual researchers without academic credentials who have the solutions you are seeking. We will make these technologies available with or without your help. If you want working technologies quickly, we suggest you find or develop a program or way to work with us, in ways that we can qualify for funding."

We may all be better off without funding from this government for our Hydrogen on demand projects. So far, it looks like a New World Order shell game to me.
--------
Gents, if you think the hidden deadline is a crock there is also a section where the government may take certain liberties with your invention, but you still own it? This is something you really need to study but you can negotiate through it if you are considered.

I waded through this 40 plus page document and got the following out of it: 1) We need to be registered with the feds as a research entity. They will not recognize the application unless we do. It takes a month or more for all the background checks and clearances necessary to gain access to their libraries for technical data on file which is a must; 2) This is a program set up for folks who are already into the Kind of R & D that would be necessary to pull this off. My experience as a Principle Investigator with the RASP program was not recognized or is enough to claim Principle Investigator status. You need to be a doctor of something, like a PhD in engineering or physics.

Look at the money being thrown around, a small portion on Hydrogen on Demand systems would take care of this before their dead lines. This must be a joke
Advanced Research Projects Agency – Energy

ARPA-E is part of a broader national energy strategy. The elements of the Administration’s Energy and Environment Agenda (www.whitehouse.gov/agenda/energy_and_environment) relevant to this FOA include:
• Reduce GHG emissions: Drive emissions to 80% below 1990 levels by 2050, and ensure 25 percent of our electricity comes from renewable sources by 2025.

• Enhance Energy Security: Save more oil than the U.S. currently imports from the Middle East and Venezuela combined (more than 3.5 million barrels per day) within 10 years.

• Restore Science Leadership: Strengthen America’s role as the world leader in science and technology.

• Quickly Implement the Economic Recovery Package: Create millions of new green jobs and lay the foundation for the future.

Under this FOA, ARPA-E is seeking R&D applications for technologies that, when in wide-spread use, will make substantial, significant, quantitative contributions to these national goals and ARPA-E Mission Areas. In addition, the proposed technology when in use may not have a negative impact on any of the ARPA-E Mission Areas.
Larry- HHO2U.com- The Original Hydrogen on Demand Site

Saturday, April 18, 2009

LET POPULAR MECHANICS KNOW HYDROGEN ON DEMAND DOES WORK

Another try by Popular Mechanics to discredit Hydrogen on Demand for your auto or truck

I would suggest that you revise your scientific data concerning Hydrogen on Demand systems in your recent article. HOD is a valid technology, and many patents were issued over the last 20+ years.

Puharich; Henry K. - Method and apparatus for splitting water molecules Patent #4394230 - 1983

Hasebe; Shigeta w/ others - Apparatus for simultaneous generation of oxygen and hydrogen gases Patent # 4747925 - 1988

Meyer; Stanley A. - Method for the production of a fuel gas Patent #4936961 - 1990

Chambers; Stephen Barrie - Method for producing orthohydrogen and/or parahydrogen Patent #6419815 - 2002

And this is just to name a few!

See other HOD patents: Here
Here is a short sample letter to these Bozos for those of you that know Hydrogen on demand does work and want to let them know:

I understand that you are defending the interest of oil companies, but I think you should review your position, because these big boys are not in control anymore.

I'm pretty sure that you know quite well what you are doing, that is, to participate in the cover-up of the oil replacement technologies.

But, remember, there's a new sheriff in town, and he has very special friends to protect him. His name is Obama. He's gonna put and end to this insane energy suppression game, that have cost the life of how many inventors, scientists, not to mention all the Americans and foreign soldiers who died in wars for oil.

This suppression game is over. Contact these guys -- Let us know how you did

> Contact info: http://www.popular mechanics. com/marketing/ contact/

Thursday, March 12, 2009

HHO Generator ebook plans SUPPORT

HHO EBOOKS
HHO GENERATOR PLANS

If you’ve purchased an HHO eBook through this site or another site, chances are that you will need a little support in order to optimize your hydrogen on demand system for your particular vehicle. While some people like to go it totally alone, others find comfort and inspiration in community.

That’s why I thought I would present here the top 5 support forums for those either wanting to build or having built HHO generators.

1. OUPower is one of the most technical groups regarding HHO generators. Many have started with an HHO eBook and proceeded to built a better Hydrogen on Demand system and talk about it here.
2. Fuel Saver offers a section of its forum for Brown’s Gas Systems where users share their triumphs and failures regarding building and optimizing their HHO gas generators. Fuel Savers is no doubt the leader in the Hydrogen on demand industry for EFIE devices and has done a lot to help those that are experimenting with hho gas and fuel saving devices.

3. Yahoo Water Car Group is one of the oldest if not the oldest group, which started as a place to talk about Daniel Dingel’s work. This group, however has evolved into a DIY hydrogen on demand group where people share what has worked for them in regard to HHO technology and what has not.
4. HHO Info is a relatively new group but is already very active and is dedicated to those who build HHO generators. This site has the look and feel of one of the Web’s main HHO destinations in the very near future.
5. Water Fueling is a relatively new message board that looks to be less technically oriented than the other forums. One section that some will find particularly useful, however is the Find a Local Installer category for those who want to pay a qualified mechanic to do the dirty work of installing a Hydrogen on demand system.

When one is reading an HHO eBook and then decides to build their first prototype, its good to know that support is just a mouse click away. These are the most helpful HHO communities that I have been able to find online and they have help many garage inventors get over the hump and improve their hydrogen on demand systems immensely.

P.S -- If you have been wondering what happened to the HHOMegaPack - Here it is - Brian Lucas the developer of this awesome one of a kind Super Pack of HHO material has allowed me to be one of the first to offer to you this awesome deal of - 12 different HHO generator Plans, 18 step by step Instruction Videos and 9 Bonus Alternative Energy books when it comes online again.
You will find a Link on this site and the following sites - http://hho2u-blog.blogspot.com/ , http://waterforgas-larry.blogspot.com/ -- http://hho4u.wordpress.com/
http://hho2uhelp.blogspot.com/ -- hho2u.com - As soon as Brian makes his hhomegapack available again, which will be any day now. You get instant access to download more ebooks and information than ANY other Water Fuel conversion system.
This is the ONLY HHO plan offering MULTIPLE plans and designs for HHO Generators and HHO Enhancers.
Make sure to Bookmark us and check back.


Bookmark and Share

Thank You Larry -- HHO2U.com

Thursday, March 5, 2009

HHO Mega Pack Will Be BACK - OUR HHO REVIWS

HHO GENERATOR PLAN REVIEWS
HYDROGEN ON DEMAND REVIEWS

We finally did a HHO plan reveiw for you guys in our last post, and guess what the HHOMEGAPACK links went dead.
After a lot of research we located Brian the owner of hho mega pack and he assured me that the Hydrogen on demand mega pack of HHO plans will be back up. I can't give you any specifics but it looks like about a week and you will be able to get this awesome pack of hho generator plans and Hydrogen on Demand systems. We will be one of the first to get the links to this HHO mega Pack when it goes live so please come back and check.
If you want Many FREE HHO generator plans and a lot of FREE Hydrogen on Demand stuff go to our site HHO2U
and visit our FREE HHO STUFF pages.

Tuesday, February 17, 2009

THE REAL HHO GENERATOR PLAN REVIEW

HHO GENERATOR PLAN REVIEWS
YOU SEE SO MANY

If You have been following our Hydrogen on Demand blogs or our HHO generator building blogs. You know that we are not in the habit of doing a lot of HHO generator "Plan Reviews".
This is because the Internet is jam packed with these HHO generator Plan reviews all telling almost the same thing.
Our main goal when we started promoting Hydrogen on Demand systems, when gasoline was climbing toward $4.00 a gallon, was to help people find some way to cut the cost of their fuel bills. We had done some Experimenting with making HHO gas when we stumbled over Ozzie and Water4gas. After building and applying the Water4gas hydrogen on demand systems to some of our own cars and seeing about 20% increase in our MPG we got deep into studying this awesome technology and wanted to help others save their hard earned money too. Well since then there has been a great boom in the Hydrogen on Demand movement and an endless array of gas saving devices and HHo generators developed. Water4gas is still the best plan for the beginner experimenter because of the loads of learning material and customer support they offer.
Updated -2013 :
Since our main goal of helping people learn about this Hydrogen on Demand technology has not changed and because we believe that the gas price will not stay down for long, we have add apage for experimentor to download free plan at HHO2u - "free hho stuff."

You can also get Diy HHO Dry cell Kits at 2hho.com



Bookmark and Share




Thank You for Stopping by : Visit our site at www.hho2u.com for hydrogen on demand parts to build your HHO generators. And complete hhodrycell systems.

Sunday, January 25, 2009

EFIEs DO I NEED ONE with HHO Dry Cell Kits

DO EFIE DEVICES WORK

DO I NEED AN EFIE WITH MY HYDROGEN ON DEMAND system

Most individuals on the Internet that sell efies or Affiliates for those that sell EFIE devices do not tell you that you may not need this electronic fuel injection enhancer with your Hydrogen on demand system.
I happen to be An affiliate marketer for Fuel Savers which is the most reliable and respected seller of EFIE devices on the Internet. I started with Fuel Savers back when they had just two EFIE devices to offer and they were the best built efies back then. Now they have a whole array of electronics to enhance your mileage gains when you install HHO (hydroxy) gas to supplement your gas or diesel fuel.
They had the best quality efie devices on the market back then and they still do.
However if you are on a tight budget, or you are like 98% of those installing a hydrogen on demand system for the first time, then you are skeptical as to whether it actually works to save fuel or not.
We recommend that you start with a simple o2 extender on your oxygen sensor(s) when first installing your hydrogen on demand devices. This usually is enough to "trick" the o2 sensor to lean out the fuel mix without adding any electronics. And with vehicles 1996 and older it's all you will ever need, as long as you add the correct hydrogen on demand system.
And if you're really cheap just wrap the sensor with 5-10 wraps of aluminum foil as described by Ozzie water4gas.
After you have run your new hydrogen on demand system with this little Free hho trick you just learned and it has proven to save you fuel go to our ..... next blog.

If you want more FREE HHO TIPS, FREE hho Generator Plans, free EFIE plans go HERE for FREE HHO STUFF
COMPLETE HHO DRY CELL Kit
Our direct page to lots of free hho generator downloads Free HHO Stuff




EFIE TRUTH - DO I NEED AN EFIE ? part#2

The truth about EFIE part #2
If you missed the first part of this blog -- It was last entry before this one.

Fuel saver link on this blog or any HHO2U article that has our link and purchase your EFIE. Better yet; bookmark our site - http://www.hho2u.com and go check it out, view a few ads, fill out a form or two, spread the word and have all your friends stop by too.
Now you are probably thinking - If my Hydrogen on demand system is saving me money with just aluminum foil wrapped around the o2 sensor, why do I need this efie device?
Because you want to save more money. Although you could probably run forever with just the simple o2 extender and your hydrogen on demand system and save lots of money the EFIE devices are adjustable, therefore allowing you to "fine tune" your system for maximum gains which means saving more money.
Why use our link to buy your EFIE? Because it wont cost you any more than if you went directly to Fuel Saver site and in some cases you will save money off the list price by buying from our links, plus we make a few dollars so we can keep bringing you FREE hydrogen on demand Tips.
If you want more FREE HHO TIPS, FREE hho Generator Plans, free EFIE plans go HERE

As a devoted advocate, experimenter and seller of hydrogen on demand systems, we
also run the hho generators EFIE devices and fuel saving systems on our own vehicles. Before we offer anything for sale on our hydrogen on demand website, we want to make sure it will perform as described.

Thursday, January 1, 2009

HHO GENERATORS DO SPLIT WATER

HHO from WATER
HHO GENERATORS
FREE HHO PLANS

HHO generators are the main component for "Hydrogen on Demand Systems for your auto and truck", they work by converting H2O (water) into Hydrogen and Oxygen (HHO)
The liquid h20 is split apart into two gases, hydrogen and oxygen It is a process known as electrolysis.DC from your car battery is used to separate the hydrogen and oxygen in water into what is known as their sub-diatomic molecular state. An electrolyte is added to the water to enhance the process NaHCo3 Sodium Bicarbonate (baking soda) is the safest electrolyte for the average HHO generator. There are other chemicals that will produce more HHO GAS but they are harder to manage. We will get into this subject in another Post.

The HHO gases produced in there sub-diatomical (split apart) state are then drawn into the engine by vacuum and mixed with gasoline or diesel and ignited by spark from the ignition.
This mixture of hydrogen and oxygen from your HHO generator and gasoline or diesel fuel results in better fuel economy because the burning process of your fuel is greatly enhanced by the HHO gases. After the explosion created in the cylinders the HHO gas will then convert back into hot steam which is then forced out during the exhaust stroke and out of the tail pipe.
The whole process begins and ends with H20.

The HHO system, which consist of a HHO generator, vacuum lines and in most cases simple electrical connections can be easily assembled and installed. The Water4Gas type HHO Generator/Hydrogen on Demand systems are the simplest DIY hho generators and install systems.

Wither you buy a HHO device pre built or assemble your own HHO Generator, you should test it by simply temporarily connecting to a battery to ensure it produces HHO gas, this is one good reason to build your HHO generators with a clear container, so you can see whats going on inside and make adjustments to the air in put to achive maximum HHO GAS volume from your hho generator before and after connecting it to your engine.

To learn more about HHO Generators, And get free HHO generator plans go to http://hho2u.com

Saturday, November 29, 2008





= LIMITED TIME OFFER ==




GET Dry Cell HHO GENERATORS AND COMPLETE INSTALL KIT AT Unheard-of Prices

HHO Dry Cell Kits

hho dry cell builders - hho2u
Best hhodrycell

  Also get diy hho kit - UN-assembled hho drycells for the builder type personalty

Diy HHO Dry Cell Kits